Shenzhen OKD Technology Co., Ltd.
Main products:Level Sensor,Flow Sensor,Flow Switch,Proximity Switch,Reed Switch
Products
Contact Us
  • Contact Person : Ms. chong jolen
  • Company Name : Shenzhen OKD Technology Co., Ltd.
  • Tel : 86-755-61348891
  • Fax : 86-755-83559755
  • Address : Guangdong,Shenzhen,Guoli Building 1308 Zhonghang Road Futian District Shenzhen China
  • Country/Region : China
  • Zip : 518031

OKD-HS25 1 inch Piston-type flow switch

OKD-HS25 1 inch Piston-type flow switch
Product Detailed
1.Environmental protection design 2.food grade PBT material 3.small, practical 4 can be arbitrary Angle adjustment

Product Show

 

Product description and advantage:

 

1.Environmental protection design 2.food grade PBT material 3.small, practical 4 can be arbitrary Angle adjustment

Product Image: 

 

The principle of operation 

Flow switch is the presence or absence of flow through the output switch control signal to the water sensor switch, the main switch signal. Divided into specific types normally open and normally closed type, in the main water control work flow monitoring role to play. Water flow switch and relay use with the usual components of the water control system, easy to use, no power is the flow switch on. 

Applications 

Mainly used for water heater, boiler, water dispensers, coffee machines, hot card machines, steam equipment, water system, the campus card sales, selling self-help water systems, water treatment equipment, cooling systems, mechanical equipment, instrumentation, pharmaceutical equipment. 

Electrical parameters 

Name 

OKD-HS25 

Product Features  

The built-in piston fluctuation activities, the piston and the magnet reed pipe with given switch signals (0/1) 

Material 

Copper, inside the tooth interface

LWH(MM)

68*39*75

ID

G1"

Startup flow rate 

3.5L/min

Maximum stream flow

30L/min

Startup flow power

70W

Operating pressure

0.005-1.0Mpa

Max pressure

1.5Mpa

Media

Water

Operating temperature 

≤80°C

Installation Method 

With products for water into the direction of arrow, level installation

Flow control

Start flow can fine-tune, loosen switch fixed nut, up-down adjustment with teeth TongXin switch can done

Water flow switch Installation instructions

1, flow switch installation environment to avoid strong vibration, and shaking with the local magnetic environment, in order to avoid the flow switch malfunction. In order to avoid particles, debris into the water flow switch must be installed in the inlet filter. 

2, when the magnetic material close to the water flow switch, its characteristics may change. 

3, flow switches, relays must be compatible with use, as less power reed switch (typically 10W and 70W) easy to burn. Relay maximum power 3W, 3W power will be greater than the normally open and normally closed phenomenon.

Routine maintenance

Periodically clear the guide rod and float on the dirt (as the media cycle may be). 

Check for the loose buckle.

 

NOTE:

 

 

 

  

 

 

OKD-HS25 1 inch Piston-type flow switch



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.